| Javier Acuña |
17-11-2005 20:12:29 |
Cita:
Empezado por SALVELINUS
A que motor y tranfer se puede acomplar sin tener que hacer fllanche,
|
Si no me equivoco la transfer era la NP208. No estoy seguro sobre la NP205.
Un poco de info:
The SM465 is an outstanding, heavy-duty truck transmission designed and used in ½, 3/4 and 1+ ton trucks. The SM465 was made by General Motors from 1968 to 1991. They are found primarily in GM and Chevrolet trucks, Blazers, Suburbans and many other models falling under the 1/4-ton to 1-1/2-ton platforms.
The 465 is an intellegently designed and very well-built transmission and remains easy to locate and generally inexpensive to buy and maintain. The strength, relatively short size and the gearing of the transmission make it a good choice for a variety of on-road and off-road situations. It has a very good set of road manners contrasted by its enormous off-road brawn.
The "SM" in the transmission's designation stands for Syncrho-Mesh, in the tradition of other GM gearboxes.
As the reader will conclude, the Chevrolet and General Motors SM465 will marry directly to a GM style bellhousing. This includes Chevy car, Buick, Oldsmobile and Pontiac bellhousings. However, since this transmission has such a large bearing retainer, the car size bellhousing bore is smaller than the transmission's input bearing retainer. If you need to join this transmission to a GM bellhousing with the 4-11/16” bore, it can be done. The bore must be opened up to 5.000” and the retainer turned down to 4.995” as precision slip-fit. We can perform this service with a very quick turnaround, or you may have it done by a good machine shop local to you. We also sell new bearing retainers turned to the dimension you require. |
