Hola Amigos.
Bueno , resulta que como soy un completo " Novato" en esto de los R/C ,y además me dejé llevar por los errados consejos de la vendedora de Tower H. ,compré este control de velocidad equivocado para mi Crawler.
Como no quiero hacer negocios para nada , lo ofrezco al mismo precio que me salió a mi , flete incluido y
Tipo de cambio antiguo.
Sólo quiero recuperar la plata.
Es para velocidad con reversa y frenos ABS !
DTXM1059
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGZX1
Sumándole el Flete lo ofrezco a $24.000.-
Está completamemte nuevo y embalado.
Ojalá le sirva a alguien.
Carlos.
This is the
DuraTrax IntelliSpeed Fwd/Rev AutosportSpeed Control for
stock motors from 18 turns up, and 4-7 cell batteries.
*** 120 Day Limited Warranty ***
FEATURES: Simple "Plug In" set up for a quick and easy speed control use
Digital glitch prevention
Fully proportional forward and reverse control, with ABS brake
Automatic set-up from the Tx. No adjustment dials or buttons, with
high-visibility Red and Green set-up LEDs
For stock motors having no fewer than 18 turns. Great for entry
level racing
Anti-lock Brake System (ABS) enables greater control while connering
Ultra high frequency gives smoother throttle response, cooler running
motors, and greater motor life
Built in ON/OFF switch lets the vehicle be turned ON at the flip of a
switch, not as soon as the battery is plugged in
Futaba J connector installed
INCLUDES: One Intellispeed Autosport Speed Control Unit with Gold Heatsinks
Pre-installed standard Tamiya type battery connectors
Pre-installed bullet style motor connectors
Pre-installed receiver connector,(FUTABA)
Mounting and hook up instructions
REQUIRES: Two .1uf capacitors (can use part number
BRPC7110)
SPECS: Voltage input: 4 to 7 cells (4.8-8.4V) ON-resistance: FWD .007 Ohms
REV .014 Ohms
Maximum current: 128A Weight: 2.1oz (60g)
Size: 1.48"L x 1.34"W x .57"H
(37.5mm x 34mm x 14.4mm)
BEC Voltage/amps: 5V /1A
COMMENTS: Won't work with the 3PK in HRS mode. PCM and FM will work fine.