Ver Mensaje Individual
Antiguo 07-02-2015, 23:46:28   #2
samir.18
Member
Top 500
 
Fecha de Ingreso: Apr 2012
Mensajes: 764
Predeterminado Re: Ayuda URGENTE ! PROBLEMA ESC/RECEIVER HPI CRAWLER KING

Probaste el manual de usuario? Nose si te servirá, nunca ni he usado una de esas cosas.

1. Turn on the transmitter’s power switch. (Be sure the transmitter
batteries are fully charged).
2. Turn the ESC switch on.
3. Press and release the setup button. The red and green LEDs
will light.
4. Move the throttle to the full throttle position and press the
programming button. The green LED will remain lit and the red
LED will go out. (If the ESC does not sense throttle movement
in 3 seconds by the transmitter, it will exit the programming
mode and you will have to begin again.)
5. Now move the throttle to full reverse and press the
programming button. The red LED will glow and the green
LED will go out.
6. Return the throttle to neutral and press the programming
button. The green LED will glow and the red LED will go out,
indicating programming is complete.
During normal operation, the green LED indicates neutral and the
red LED indicates full forward and full reverse.

http://www.bladehelis.com/prodinfo/Files/LOSB9521.pdf

http://www.horizonhobby.com/pdf/LOSB0104_Manual.pdf

Última edición por samir.18 fecha: 08-02-2015 a las 06:40:06
samir.18 está offline   Responder Con Cita